EXSYS EX-43073 Manual de Instalação descarregar pdf

If you are ready with the jumper settings, please proceed with the following installation

instructions. Because the designs of computers are different, only general installation

instructions are given. Please refer your computer’s reference manual whenever in doubt.

1. Turn off the power to your computer and any other connected peripherals.

2. Remove the mounting screws located at the rear and/or sides panels of your Com-

puter and gently slide the cover off.

3. Locate an available expansion slot and remove its covers from the rear panel of your

computer. Make sure it is the right expansion slot for the card (see card description)

4. Align the card with the expansion slot, and then gently but firmly, insert the card.

Make sure the card is seated and oriented correctly. Never insert the card by force!

5. Then connect the card with a screw to the rear panel of the computer case.

6. Gently replace your computer’s cover and the mounting screws.

HARDWARE INSTALLATION :

6 5

Windows Server 200x:

After starting Windows it recognizes a new “PCI Controller“ and open the hardware

assistant. Please choose manual installation and put the driver CD into your CD-Rom

drive. Now enter the Path "D:\IO\OXFORD\" and then the directory of your operating

system for Server 2000: “2000“ for Server 2003: “XP32“ or “XP64“ and for Server

2008: “Vista32“ or “Vista64“ into the box for the Path/Source and click at >next/

continue<. Now Windows search for the drivers in the specified directory. Follow the

hardware assistant and finish the installation. If Windows recognizes other new devices

repeat the above described steps. Attention! Restart Windows in any case after install-

ing the drivers.

CHECK THE INSTALLED DRIVER:

Click at Start<>Run< then enter “compmgmt.msc“ and click at >OK<. In the windows

that open select >Device Manager<. Under „Ports (COM and LPT)“ you should find

one or more new ”PCI Ports“ as sample (COM3). If you see this or similar entries the

card is installed correctly.

CHANGE PORT NUMBER:

If you like to change the port number for example COM 3 to COM5, open the >Device

Manager< click at >COM3<, >Settings< and then >Advance<. There you can change

between COM 3 to 256.

LINUX:

There are no drivers available for Linux, but the card is supported by the most versions

of Linux. Because each individual distribution and kernel version of Linux is different,

sadly we cant provide a installation instruction. Please refer to the installation manual

for standard IO ports from your Linux version! In some newer versions the card will

even be installed automatically after starting Linux.

JUMPER EINSTELLUNG & ANSCHLÜSSE:

Die EX-43073 ist eine PCI serielle RS-232 Karte mit zwei seriellen FIFO 16C95x Ports,

für den Anschluss von High-Speed seriellen RS-232 Peripherie Geräten (z.B. Terminal,

Modem, Plotter usw.). Sie unterstützt den 32 und 64-Bit PCI bzw. PCI-X Bus mit 5 Volt

und 3,3 Volt. Es ist nicht möglich die I/O Adressen und Interrupts manuell einzustellen,

da die Einstellungen der Karte vom System (BIOS) und beim Installieren des Betriebs-

systems automatisch vorgenommen werden. Es besteht bei Bedarf die Möglichkeit, +5V

- oder +12V auf einen von vier Pins der Stecker zu legen (POS System).

BESCHREIBUNG & TECHNISCHE DATEN :

AUFBAU :

Kompatibilität: PCI & PCI-X 3,3Volt & 5Volt bei 33Mhz

Betriebssysteme: WIN 9x/2000/XP/Server 200x/Vista/7, (Linux vom OS)

Anschlüsse: 1 x 9 Pin Seriell D-SUB Stecker, 1 x 25 Pin D-SUB Stecker

Lieferumfang: EX-43073, Treiber CD, Deutsche Anleitung

Zertifikate:

CECE

/ FCC / RoHS / WEEE DE97424562 / WHQL

DRIVER INSTALLATION :

Windows 9x/2000/XP/Vista & 7:

After starting Windows it recognizes a new “PCI Controller“ and open the hardware

assistant. Please choose manual installation and put the driver CD into your CD-Rom

drive. Now enter the Path "D:\IO\OXFORD\" and then the directory of your operating

system “95_98_ME“ “2000“ “XP32“ “XP64“ “Vista32“ “Vista64“ “Win7_32bit” or

“Win7_64bit” into the box for the Path/Source and click at >next/continue<. Now

Windows search for the drivers in the specified directory. Follow the hardware assistant

and finish the installation. If Windows recognizes other new devices repeat the above

described steps. Attention! Restart Windows in any case after installing the drivers.

CHECK THE INSTALLED DRIVER:

Click at Start<>Run< then enter “compmgmt.msc“ and click at >OK<. In the windows

that open select >Device Manager<. Under ”Ports (COM and LPT)“ you should find

one or more new ”PCI Ports“ as sample (COM3). If you see this or similar entries the

card is installed correctly.

CHANGE PORT NUMBER:

If you like to change the port number for example COM 3 to COM5, open the >Device

Manager< click at >COM3<, >Settings< and then >Advance<. There you can change

between COM 3 to 256.

S1: 9 Pin Stecker

Seriell Anschluss

S2: 9 Pin Stecker

Seriell Anschluss

Oxford OXuPCI952

JP2: +5V oder +12V

einstellbar auf

den 9 Pin von S2

J4: Anschluss vom

PC Netzteil für

+5V oder +12V

Spannung

JP3: Umschaltung der

Spannung von

PCI-BUS auf

PC-Netzteil

JP1: +5V oder +12Veinstellbar auf

den 9 Pin von S1

+5V

+12V

Dis

Pin 1

Pin 8

Pin 9

Pin 4

JP3 auf PCI = +5 or +12V

kommt vom PCI BUS

JP3 auf AUX = 5 oder +12V

kommt vom PC Netzteil

Mit der EX-43073 haben Sie die Möglichkeit +5V- oder +12V auf einen der folgenden

vier Pins, des 9 Pin Steckers S1 und S2 zu konfigurieren :

Achtung !! Nur konfigurieren wenn für das Peripheriegerät auch +5Volt oder +12Volt

gebraucht wird. Für normale Anwendungen, Jumper nicht verändern.

JP3:

PCI AUX

+5V

+12V

JP1 & JP2:

(S1 + S2)

Bedienungsanleitung

Vers. 1.0 / 05.08.10

1 +5V

2 GND

3 GND

4 +12V

J4:

Wenn JP3 auf AUX gestellt ist muss J4 mit dem Stromanschluss vom

PC Netzteil verbunden werden! Bitte auf die richtige Polarität achten!

Achtung! Stecker nie bei eingeschaltetem PC ein oder ausstecken!

43073

English

43073

English

JUMPER SETTING & CONNECTORS:

DB9M:

Pin Signal Pin Signal Pin Signal

1 CDC 4 DTR 7 RTS

2 RXD 5 GROUND 8 CTS

3 TXD 6 DSR 9 RI

Serial 9 Pin D-SUB male connector (S1 and S2):

JP4: Ein/Ausschaltung

Parallel-Port

JP4:

DIS/ENA

JP4 to DIS = Parallel Port disable (Factory setting)

JP4 to ENA = Parallel Port enable (no function)

Attention! This jumper has no function for the EX-43372.

1 2

Bedienungsanleitung 1
User Manual 2

Resumo do Conteúdo

Página 1 - Bedienungsanleitung

If you are ready with the jumper settings, please proceed with the following installation instructions. Because the designs of computers are dif

Página 2 - User Manual

2 3 4 The EX-43073 is a plug & play high-speed serial RS-232 expansion card for the PCI & PCI-X Bus. The EX-43073 provides two high speed RS-2

Comentários a estes Manuais

Sem comentários

EXSYS EX-43073 Manual de Instalação

Consulte online ou descarregue Manual de Instalação para Placas/adaptadores de interface EXSYS EX-43073. EXSYS EX-43073 Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais

Manuais e produtos relacionados com Placas/adaptadores de interface EXSYS EX-43073